Discs 6 x NH Hook & Loop General Purpose 36-grit

Discs 6 x NH Hook & Loop General Purpose 24-grit

Sheets General Purpose VASL Siliverline 8x20-1/8 100-grit

Sheets General Purpose VASL Siliverline 8x20-1/8 60-grit

Sheets General Purpose VASL Siliverline 8x20-1/8 36-grit

Sheets General Purpose VASL Siliverline 8x20-1/8 20-grit

Sheets General Purpose VASL Siliverline 8x20-1/8 16-grit

3" trash pump with honda engine, low oil alert, Silicone carbide mechanical seals, true vibration isolators and High Chrome impellers are standard on all Tsurumi trash pumps

2" centrigugal pump with Honda engine, Low oil alert , Silicone carbide mechanical seals and true vibration isolators are standard on this Honda powered 2 dewatering pump

2" electric dewatering pump. Powerful pumps built with durable materials in an easy handling design. Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry run capability

2311 Drywall Lift-11'

2112 Contractor Lift Assy

Cutter Soil Pipe, 246 1 1/2"-6" pipe

2"-4" Pipe Cutter, Heavy-Duty 4-S

Cutter 1/8"-2", Heavy-Duty 2-A

36" Pipe Wrench lightweight aluminum 836

Pipe Wrench 24" lightweight aluminum 824

Pipe Wrench 18" lightweight aluminum 818

Threader with dies, No. 12-R: Capacity 1/8"-2"

17" 1.5 hp Floor Machine

 2" collated Flooring Staples for use with PNI's 472 Portamatic-S Flooring Stapler or any Flooring Stapler requiring 15 to 15-1/2 Ga staples. This is a cost effective method of installing 3/4“flooring to a sub floor with joist over crawlspace construction. Applications include 1/2 “to 1” thick solid wood flooring. Staples are packed in quantity of 1000 and one carton will cover approximately 1000 sq ft of flooring. The 1-1/2 “staple is also available in stainless steel (# 4725 and # 47281) for use with ACQ Lumber or any application where corrosion is a concern. Always refer to the floors installation guidelines for proper fastener schedule. Caution: Do not use in any tool requiring a 16 or 18 ga fastener. Caution should be used when installing exotic hardwoods as the impact of the 1/2” crown may split the tongue. Always refer to the floors installation guidelines for proper fastener, type, size, length and fastening schedule. Do not use in any

PNI’s 1” x 18 Ga x 1/4" crown staple is designed for use on a variety of applications including the nailing of 1/ 4” to 1/2” hardwood and engineered flooring. Galvanized to resist corrosion. One pack of 5000 Porta-Nails will nail approximately 800 square feet of 3-1/2” wide flooring using an 6” nailing schedule. For use in Porta Nailer Models 461, 461A and with any Floor Stapler or Underlayment Stapler requiring an 18ga. x 1/4" crown staple. Always refer to the floors installation guidelines for proper fastener schedule. Caution: Do not use in any tool requiring a 20 ga fastener

PNI’s 2 In. 18 gauge L Head Flooring nail is for use with PNI’s 418A Portamatic Evolution and with all brands of nailers using an 18 ga L Flooring nail /cleat. The 2 In. nail is recommended for use with 1/2 In. to 5/8 In. engineered, bamboo and solid hardwood floors. The 18 gauge nail is a thinner than the traditional 16 gauge nail and is effective in reducing the splitting of tongues on vertical and horizontal grain bamboo and exotic hardwoods. The thinner nail will also reduce the chance of dimpling engineered and thinner hardwood floors. Our nail has sharp serrated edges to bite into the flooring and a blunt tip to help reduce the risk of slitting the hardwoods. The nails are collated with tape and are packed 1000 per pack. Each pack will cover approximately 200 sq ft of 2-1/4 In. and 350 sq ft of 3-1/4 In. flooring when following a nailing schedule of 6 to 8 inches. Our nails are produced with the finest material and will hold up for the life of the floor

The 472 Portamatic S pneumatic flooring nailer is designed to staple ¾” thick wood flooring and includes a shoe pad for ½” wood flooring Designed to accept 1-1/ 2 or 2” 15 ga x ½” crown Flooring Staples. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the staple is set tight in the proper location every time for a wood floor that stays put. The Portamatic S is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 15ga. flooring staples are made of the finest materials and to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protection for pre-finished flooring